Step-By-Step-Guide: Install Custom MoDaCo ROM and Kernel On Samsung Galaxy Tab

If you are a Galaxy Tab user, I’ve a great news for you. Modaco – a famous smartphone and PC forum has just launched a custom rom and kernel for this awesome tablet. Download and install this ROM and get  increased performance. Yes thanks to them, and thanks to a guy at Droid-den who shared this step-by-step guide with us.

Try it at your own risk – WowTechy will not be responsible for any of the damage caused by this guide.

Backup all your data first as  this guide will wife all your tablet data. Try out titanium for getting backup before you start with this guide.

This guide originally was written for a UK GSM version of Galaxy Tab, yet you can try it on your tablet which is the other version of this sexy device.  There are some Pre-Instructions which you should take care first; these are as follows:

1. Download and install  the latest Samsung Kies on your PC.
2. Follow this guide here to root your Galaxy Tab.
3. Download and Install Titanium backup; once installed of course backup your data.
4. Your SDcard should be inserted through all this process; make sure you’ve a good free space on it too.

Next step is to Install Kernel – follow these steps.

1. Download these files.
   1. GalaxyTab-www.droid-den.com.zip.001
   2. GalaxyTab-www.droid-den.com.zip.002
2. Unzip the 001 file, second automatically will be unzipped.
3. Restart your Galaxy Tab into DOWNLOAD mode; you can do so by  pressing Volume DOWN and Power On together at the startup time.
4. Now open Odin3 v1.7.exe from PC.
5. Ensure that your Galaxy Tab is connected with PC via USB cable.
6. The ID:COM box will become yellow that means it has detected the Tab.
7. Hit the PIT button; select the P1_20100909.pit file that you downloaded from the given links.
8. Now click the PDA button and select the p1000-mck-r3-ext4-cwm.tar . Make sure that PDA is ticked after selecting the file.
9. UNTICK Re-Partition.
10. These boxes should be ticked only:
    1. Auto Reboot
    2. F. Reset Time
    3. The PDA tickbox
11. Time to start baby – hit Start ; wait for a while PASS! will show highlighted as green on the Odin.
12. Don’t worry as PC will get stuck on the Samsung loading screen for a while.
13. After a while when it shows you some progress; turn the tab off. I hope you know how to turn it off 😛 but let us recall it; you can do so  by holding the power button for nearly 5 seconds.
14. Now you’ve to turn Tab on into RECOVERY mode; you can do so by pressing Volume UP and Power On at the same time.
15. It is time that Galaxy Tab will perform the EXT4 conversion.
16. It’ll take time, so be patient. Once it is done; Reboot the Tab by clicking the reboot system now .
17. Let it take the time as much it wants; once done, your Tab goes onto the actual ROM!

It is time now to Install ROM ; follow these steps.

1. Mount Tab on your PC.
2. Copy the file named r1-p1000-update-modacocustomrom-wipe-unsigned.zip on the external SDcard.
3. Unmount the Tab and remove USB cable.
4. Reboot the Tab into RECOVERY modeyou can do so by pressing Volume UP and Power On at the same time.
5. Select backup and restore which can be done using Volume keys and Power button. Navigate through using Volume keys and select through Power button.
6. Select BACKUP and let it work on it.
7. Once done, select install zip from SDcard.
8. After that choose zip from SDcard.
9. Now Select the r1-p1000-update-modacocustomrom-wipe-unsigned.zip file that you copied on SDcard earlier.
10. Go for Yes and let it update.
11. Once it gets complete, select reboot system now.

WoHooooo – you are done with it. Restore the titanium backup to have the old state – but bit faster this time :). Going to try it? Don’t forget to share your experience with us.